A Theoretical Perspective to Study the Optical Properties of Tetrafluoroborates

In this study, a series of tetrafluoroborates with non-π-conjugated [BF₄] tetrahedra are investigated systematically by first-principles calculations. Theoretical studies demonstrate that tetrafluoroborates with alkali and/or alkaline-earth metals are more favorable for deep-ultraviolet transmission and are comparable to the classical deep-ultraviolet (deep-UV) material, MgF₂. Furthermore, bandgap decrease with the increasing of ionic radii in alkali and/or alkaline-earth metals. Introducing highly polarizable cations with d₁₀-configuration or cations with lone pair electrons into the structure will decrease the bandgaps. The birefringence and second harmonic generation effects are not large enough in tetrafluoroborates because polarizability anisotropy and hyperpolarizability in non-π-conjugated [BF₄] tetrahedra are much smaller than those in π-conjugated groups. However, the second harmonic generation effect for [BF₄] tetrahedra has a higher contribution in comparison with that due to birefringence. To effectively synthesize the borate fluorides or fluorooxoborates in the deep-UV region, raw materials with B−F bonds are preferred.     

Selective adsorption behaviors of guest molecules COR in the hexamer host networks at liquid/solid interface

Here,the selective adsorption behaviors of guest molecule COR in two hexamer host grids were investigated by means of scanning tunnelling microscope(STM).The assembled structures of small functional organic molecules TTBTA and TATBA were thermodynamically stable.Interestingly,the introduction of the guest molecule COR destroyed the original hexamer structure of TTBTA and combined with it to form a new triangular host-guest system.Different from TTBTA,the introduction of the guest molecule COR did not affect the six-membered ring structure of TATBA.Furthermore,the co-assembly structure of TTBTA/TATBA/COR was established and the guest molecule COR showed preferential adsorption to the TATBA host grid.Density functional theory(DFT) calculations had been performed to disclose the mechanism of the involved assemblies.     

An improved and practical route for the synthesis of enzalutamide and potential impurities study

An improved and practical synthesis of enzalutamide was accomplished in five steps. Starting from 4-bromo-2-fluoro-benzonic acid, a methyl esterification, Ullmann ligation, methyl esterification, ring closing reaction and final methyl amidation provided the target in 35% total yield with 99.8% purity. Five identified impurities were also synthesized. This efficient and economical procedure avoids the use of highly toxic reagents and multiple recrystallization operations, which is suitable for further industrialization.     

LF-NMR和MRI对干制虾仁复水过程水分状态及品质变化的研究

采用低场核磁(LF-NMR)及其成像技术(MRI)研究干制虾仁在25℃复水过程中的水分含量、分布及状态变化,并通过线性回归分析不同复水时间干制虾仁的LF-NMR参数与质构特性及复水率的相关性。实验结果表明,干制虾仁复水过程中存在结合水、不可移动水和自由水3个组分峰,随着复水时间的增加,结合水无明显变化,而自由水、不易流动水含量增加,且自由度增加,流动性增大。LF-NMR参数(T_(22)、T_(23)、A_(22)、A_(23)和A_(Total))和硬度、咀嚼性、弹性、凝聚性以及复水率有极显著的相关性(R~2≥0.613),为干制虾仁复水过程中品质的快速无损预测提供了一种新方法。     

鱼组织中双去甲氧基姜黄素、去甲氧基姜黄素和姜黄素含量的超高效液相色谱法测定

建立了黄颡鱼、团头鲂和草鱼血浆、肌肉、肝脏、肾脏中双去甲氧基姜黄素、去甲氧基姜黄素和姜黄素同时测定的超高效液相色谱紫外检测法(UPLC-UV)。样品经乙腈(含0.01%乙酸)提取,无水硫酸钠除水,正己烷去脂等样品处理,在ACQUIT UPLC BEH C18色谱柱上分离,428 nm波长处测定。双去甲氧基姜黄素、去甲氧基姜黄素和姜黄素在0.01~5.00 mg/L浓度范围内呈良好的线性关系,相关系数(r2)分别为0.998 7,0.999 8和0.999 6。在空白鱼组织中进行0.025,0.05,0.50,1.00 mg/kg 4个水平的加标回收实验,3种待测组分的平均回收率为64.7%~102.2%,相对标准偏差为0.69%~10.8%。鱼组织中3种待测组分的检出限(LOD)均为0.010 mg/kg,定量下限(LOQ)均为0.025 mg/kg。应用该方法研究了姜黄素在团头鲂体内的药代动力学规律。     

耐高温端乙炔基聚醚酰亚胺改性含硅芳炔树脂

采用预共聚法,以含硅芳炔树脂(PSA)和端乙炔基聚醚酰亚胺(PEI)为原料,制备了端乙炔基聚醚酰亚胺改性的含硅芳炔(PEI-PSA)树脂及其与T300碳纤维平纹布的复合材料T300/PEI-PSA。通过动态热机械分析(DMA)和X射线能谱仪(EDS)研究了溶剂、溶液浓度、反应温度对预共聚反应的影响,确定了预共聚反应的最佳条件,得到了均匀分散的PEI-PSA树脂。通过红外光谱(FT-IR)、核磁共振氢谱(1 H-NMR)、差示扫描量热(DSC)、热失重(TG)、DMA和EDS等表征了PEI、PEI-PSA树脂及T300/PEI-PSA复合材料的结构和性能。结果表明,当PEI质量分数为20%时,PEI-PSA树脂浇铸体的弯曲强度达44.5 MPa,较PSA树脂浇铸体提高了90.2%;T300/PEI-PSA复合材料的弯曲强度达602.7 MPa,较T300/PSA复合材料的弯曲强度提高了124%。     

The Effect of Intermolecular Hydrogen Bonding on the Polyaniline Water Complex

The polyaniline water hydrogen-bonded complex was studied by first-principles calculation. The density functional theory method was used to calculate the structure characters, natural bond orbital charge distribution, infrared spectra and the frontier molecular orbital. Results showed that the H–O···H–N and C–N···H–O type intermolecular hydrogen bonds were formed. The bonds involved in the intermolecular H-bond were all influenced by the hydrogen bonding interaction. During the hydrogen bond formation, the polymer chains in the complexes were all charged, which can be an important factor contributing to the increase of electrical conductivity. The N1–H vibration was strongly influenced, and the locations as well as the intensities of N1–H absorption bands were all changed in the complexes. In the orbital transition of HOMO to LUMO, the electron density transferred from benzenoid ring to quinoid ring.     

Denitration of simulated high-level liquid waste by formic acid for the connection of PUREX process with TRPO process

Journal of Radioanalytical and Nuclear Chemistry - Denitration of simulated high level liquid waste (HLLW) by formic acid was performed for the connection of Plutonium Uranium Recovery by...     

Efficient P3HT:PC61BM solar cells employing 1,2,4-trichlorobenzene as the processing additives

The efficiency of the poly(3-hexylthiophene)(P3HT) and [6,6]-phenyl C_(61)-butyric acid methyl ester(PC_(61)BM) based organic solar cells was enhanced by using 1,2,4-trichlorobenzene(TCB) as a processing additive to control the blend morphology. The addition of TCB improved the arrangement of P3HT which resulted in good phase separated blend films. Correspondingly, the optimized solar cells showed a power conversion efficiency(PCE) of 4.17% with a fill factor(FF) of 0.69, which were higher than those of common thermal annealing devices(PCE 3.84%, FF 0.67). The efficiency was further improved to 4.74% by thermal annealing at 150 °C for 10 min with a higher FF of 0.74.